A Tank 300 phone holder needs to match three things: your dashboard, your phone with its case, and the way you are permitted to use it. A dashboard rail may suit a fixed multi-device setup; a suction mount may suit a removable single-phone setup. Neither is automatically right for every Australian right-hand-drive Tank 300.
Before choosing a finish or adding the cheapest option to your cart, find out what the option actually contains. Some listings separate the vehicle base, connecting hardware and phone cradle. This guide explains those differences, compares current store options and gives you a practical fitment enquiry to send before ordering.
A phone holder is not always a complete mounting kit
The cradle holds the phone; the base attaches to the vehicle. Depending on the design, a ball joint, arm, clamp or adapter connects them. Some products combine these parts, while others sell them separately. A photograph of a fully equipped dashboard is not a packing list.
- Vehicle base: a model-specific rail or platform, or a universal attachment such as a suction cup.
- Connector: the hardware between the base and cradle. Confirm its interface, required fasteners and permitted accessory load.
- Phone holder: the clamp, cradle or other retention system that must fit the phone and its case.
If you already own a holder, do not assume its connector fits a new rail. Ask for the actual interface specification rather than judging a ball or clamp by its photograph. Likewise, “phone holder” does not necessarily mean that a charging module, cable or vehicle-specific adapter is supplied.
For a simple daily-driver setup, start with one phone and identify the minimum complete assembly. If you also need a radio microphone or camera, list each device separately. That makes it easier to confirm attachments without buying an oversized platform you will not use.
Dashboard rail or suction mount: which should you shortlist?
Choose by mounting requirements and cabin space, not by an assumed strength ranking. A vehicle-specific rail still needs exact-fit confirmation, and a “universal” suction mount still needs a suitable surface. We have not conducted a vibration or load comparison of the products below.
| Mounting approach | Reason to consider it | What to resolve first |
|---|---|---|
| Dashboard rail or platform | A planned, fixed layout for a phone and other compatible equipment. | Dashboard version, attachment points, included cradles, device limits and screen clearance. |
| Suction-cup mount | A removable option when an approved surface and suitable position are available. | Surface type, cup footprint, arm reach, visibility and the manufacturer's maintenance instructions. |
| A-pillar attachment | An alternative location if the exact vehicle and mounting arrangement are approved for it. | Trim compatibility, airbag deployment paths, occupant space and driver sightlines. |
A-pillar mounting is not our default fallback when the dashboard is crowded. If clearance from safety systems is uncertain, obtain vehicle-specific advice from a qualified installer. Do not drill into trim or route wiring behind it on the basis of a generic product photograph.
If your existing inbuilt system already provides the navigation you need, an additional screen may be unnecessary. Check the functions available in your particular vehicle and the rules for your licence before adding equipment. The wider Tank 300 interior accessories guide can help you plan storage and other cabin changes together.
Check the Australian right-hand-drive layout first
A left-hand-drive installation image does not establish right-hand-drive compatibility. Check the model year, powertrain, dashboard shape and screen arrangement against your own car. “Tank 300” in a title is the starting point for an enquiry, not confirmation that every version uses the same bracket.
The JUSN store image above shows the steering wheel on the left. It helps identify the type of rail, but it is not a recommended device layout for an Australian vehicle. It does not confirm the same attachment points, driver view or safety-system clearance on your car. Devices shown are not evidence of what is included.
With the vehicle parked, assess the proposed position from the normal driving seat, not just through an open passenger door:
- Can you see the instruments, mirrors and road without the phone obstructing them?
- Are the hazard switch, screen, vents and other controls accessible?
- Does the holder stay clear of steering movement and passenger space?
- Can the phone rotate, release and connect to a cable without hitting surrounding trim?
- Have airbag restrictions been checked against the correct owner's manual and installer guidance?
A visual check alone cannot certify airbag clearance. Ask for instructions covering the actual mounting location; do not infer a safe zone from where a dashboard seam appears. Where the seller cannot establish compatibility, pause the purchase rather than treating an attractive installed photo as approval.
What do the current store listings actually offer?
These are examples from Decision Maker 4X4 listings checked on 6 September 2026, not a tested “best mount” ranking. Read the selected option and request an itemised contents list before payment.
JUSN central control integrated bracket
The JUSN Tank 300 bracket listing describes a black 6061-alloy mounting platform for compatible petrol interiors. It does not specify model years. Confirm Australian right-hand-drive compatibility and whether the phone cradle and its connector are included; do not extend the petrol fitment description to a hybrid without confirmation.
RAWME universal phone and intercom bracket
The RAWME universal bracket range lists an A-pillar phone holder, small and large suction-cup phone holders, and an intercom suction-cup bracket as different options. The intercom option is not automatically a phone holder. The listing says fit depends on factors including dashboard shape, trim, glass angle, suction surface and bracket type.
Centre-console extension platform and phone-holder options
The Tank 300 extension platform listing separates a Magic Diamond phone holder, multifunction platform, simplified platform and vehicle-specific accessories into four purchase options. Its fitment text refers to compatible petrol and hybrid interiors, but exact years and your dashboard still need confirmation.
This is a useful example of why the variant matters: selecting the phone-holder option should not be treated as ordering every platform and radio accessory in the picture. Ask which base, connector and fasteners are needed for that exact option. The listing's original-hole installation description applies only where the selected arrangement supports it; it is not a promise that every configuration installs without modification.
Check the phone, cable route and summer conditions
Measure the phone in the case you actually use. Give the seller its overall width, thickness and weight, including any wallet, grip or other attachment. Ask for the holder's supported range and retention instructions; a large screen diagonal alone is not enough to establish fit.
Check that the jaws do not press side buttons, the camera bump does not prevent proper seating and the charging plug has room to enter. If a product uses a magnetic interface, confirm the specified phone or case requirements. A magnet, metal plate or alloy body does not by itself establish wireless-charging compatibility.
Plan the cable route before final installation. It must not hang into steering or pedal space, snag a control, or cross an airbag deployment path. Leave only the movement allowance needed for the approved phone positions. Do not add improvised wiring behind safety-related trim.
Heat deserves a separate check. Apple's temperature guidance warns against prolonged navigation use in hot conditions or direct sunlight, and says excessive heat can slow or stop charging and dim the display. These are device limits, not a temperature rating for any mount sold here. Follow your own phone manufacturer's instructions and take the phone with you rather than leaving it in a hot parked car.
For suction mounts, RAWME advises checking cups and fasteners regularly, including after heat, dust or rough-road use. Follow the selected product's mounting and tightening instructions. Stop using an assembly that moves, releases or damages its contact surface; do not compensate by overtightening it.
Does mounting a phone make it legal to use while driving?
No. A holder does not override licence restrictions or permitted-use rules. Check both the road authority where you will drive and the conditions attached to your licence. The following examples show why a single Australia-wide claim would be misleading.
- NSW: the NSW Government phone-use guidance prohibits learner, P1 and P2 drivers from using a phone while driving, including mounted or hands-free use and while stopped at lights. Full-licence holders have limited permitted uses; holders must be commercially manufactured, fixed to the vehicle and not obscure vision.
- Victoria: Transport Victoria's learner and probationary guidance allows navigation and audio on a properly mounted device when set up before the journey, but prohibits touching that mounted device during the drive, including at traffic lights, and using voice controls.
These are selected points, not a complete legal guide. Read the current official rules before travelling. If you need to change the route or adjust the physical mount, pull over where permitted and park safely first.
Send this fitment enquiry before ordering
A short, specific enquiry is more useful than asking whether a holder “fits Tank 300”. Use the following checklist and attach a clear parked-vehicle dashboard photo with personal information removed:
- Vehicle: model year, trim, petrol or hybrid, and right-hand drive.
- Dashboard: screen layout and any existing rails, trim changes or accessories.
- Phone: model, case, width, thickness and combined weight.
- Selected product: page link and exact option name.
- Contents: vehicle base, connector, cradle and required fasteners.
- Evidence requested: matching installation instructions, confirmed interfaces and mounting restrictions.
Ask us to confirm your mounting setup
If you are planning several changes, use the Tank 300 upgrade-priority guide to keep the project focused. A complete, confirmed single-phone setup is a better purchasing outcome than a dashboard full of equipment whose fitment remains unresolved.
Frequently asked questions
Will a universal phone mount fit every Tank 300?
No. “Universal” does not remove the need to check the attachment surface, position, phone size and cabin clearances. Confirm the exact mount type and your vehicle layout.
Is a dashboard rail supplied with the phone holder?
Not necessarily. The extension-platform listing above offers the phone holder and platforms as separate options. Request a contents list for the selected variant and identify any additional mounting hardware.
Can I use a left-hand-drive installation photo to order for Australia?
Use it to identify the product, not to confirm fitment. Ask for evidence covering your right-hand-drive dashboard, model year and powertrain before ordering.
Which mount is best for corrugated roads?
We cannot name a tested winner from these listings. Ask for the manufacturer's intended-use limits and evidence for the exact assembly and device weight. Secure-looking metal construction alone is not proof of vibration performance.
Does a phone holder include charging?
Only if the selected option explicitly includes it. Confirm the charger, cable, power requirements and phone-case compatibility separately.
Editorial basis: Prepared with AI assistance for Decision Maker 4X4 using the linked store listings and official guidance, checked 6 September 2026. No physical fitment, load or vibration testing is claimed. The cover and component illustration are AI-generated concepts, not photographs of a specific supplied kit. The two store images are identified in their captions; neither establishes Australian fitment or legal approval.
