The RAWME TANK 300 cup holder is an extra drinks-storage accessory, offered in red, black and silver; its suitability depends on the actual mounting position and the cup you use. The current listing describes compatible petrol and hybrid interiors, but does not publish a complete model-year chart, cup-diameter range or load rating. Choose by usable clearance first and colour second.
Commercial product guide by Decision Maker 4X4, which sells this accessory. Listing and photographs checked 23 October 2026. This is catalogue-based guidance, not our installation, spill, vibration or thermal test. All four images are from our product gallery.
Source verification date: 2026-10-23.
In this guide:
- What the gallery actually shows
- Red, black or silver?
- How to check your cup and clearance
- Vent access and temperature claims
- What to ask before ordering
- Common questions
What does the cup-holder gallery actually show?
The product-only view shows a circular, disc-like assembly in its folded position. Installed catalogue views show the holder beside a circular dashboard vent; one black example shows the support opened beneath the upper ring. Those pictures explain the intended layout better than the product name alone, but they do not supply a measured installation drawing.
The useful distinction is between a holder that can be stowed when empty and a place that safely supports your chosen drink when open. An attractive folded position does not establish the working envelope. Ask to see the open holder from the side, including its lower support and attachment area, rather than relying only on a front-on photograph.
Our TANK 300 door-handle pocket guide concerns a different storage location. It is not an alternative mounting system for this holder. Keep each accessory tied to its own intended task: a pocket for small items, or a dedicated support for a suitable drinks container.
Should you choose red, black or silver?
| Listed colour | Visual role | What to compare before ordering |
|---|---|---|
| Black | A darker accent around the vent area | How the finish looks beside your existing dashboard trim |
| Red | A more prominent coloured detail | Whether the shade suits nearby trim and accessories |
| Silver | A lighter, metallic-looking contrast | A current close-up under neutral lighting |
These are appearance choices, not different documented cup capacities or performance levels. The listing does not establish that one colour is stronger, supports a heavier bottle or fits more model years than another. Nor does a metallic-looking surface establish a particular alloy specification.
The silver installed image is useful for judging contrast around the vent, but colour rendering changes with the screen and lighting. If a precise match matters, request a recent photo of the option that will actually be dispatched. Give the seller the colour and product link together so a similar-looking accessory is not substituted in the conversation.
How do you check the cup rather than just the holder?
Start with the container you use most often, including its lid, handle, sleeve or protective boot. Measure its widest relevant section and base, then ask for the holder's usable opening, support depth and surrounding clearances. The current page does not provide those measurements, so a familiar-looking takeaway cup is not a substitute for them.
Check the movement needed to place the container in the holder and remove it. A mug handle can need more room than a plain bottle, and an easy fit when the vehicle is parked does not demonstrate stability during driving. Do not infer retention from a photograph of an empty ring. Request the supplied item's operating and use guidance, including any stated limits.
Also consider the chosen location from the driver's seat. The listing specifically calls for avoiding interference with airbags, controls, vents, screens, shifter movement and visibility. Have the installer check the complete arrangement with the holder folded, opened and carrying the intended container. If the location creates an obstruction, a different storage solution is more useful than forcing this one to fit.
Does a vent-mounted layout heat or cool a drink?
Do not treat the old promotional artwork as evidence of active heating or refrigeration. Some gallery panels refer to summer cooling and winter heating. The current written description does not specify a powered temperature-control system, a target drink temperature, a cooling rate or an electrical connection. We cannot establish those capabilities from the pictures.
Likewise, do not turn wording about the air outlet into a promise of unchanged airflow in every installation. The physical placement of the holder and the size of the container both need checking. Ask whether you can still adjust the vent and operate nearby controls with the actual cup in place.
The listing also warns against placing hot liquids where a spill could reach passengers or controls during off-road driving. Choose storage around the journey, not only around the photograph. A holder is not evidence that an open hot drink is suitable for rough terrain; do not adjust or retrieve the container in a way that distracts from driving.
What should you send before ordering?
Send the product link, preferred colour, build year, grade and powertrain, plus clear photographs of the proposed location and existing accessories. Add the container measurements. Ask for the exact attachment method, included components, installation instructions and confirmation that the supplied holder matches that vehicle and position.
Do not assume it shares mounting hardware with a TANK 300 phone bracket. Two items pictured near the dashboard can require different interfaces. Use our contact page to resolve the actual installation before buying. A useful answer identifies the part, location and container together, rather than simply repeating a broad TANK 300 fitment label.
Common questions
Is this holder verified for every TANK 300 model year?
No complete model-year chart is published in the current listing. Confirm the specific build, powertrain, trim and installation position instead of treating the model name as universal approval.
Can it hold any large bottle?
A universal bottle-size or load claim is not established. Obtain the usable dimensions and compare them with the complete container, including any sleeve or handle.
Are the three colours different functional versions?
The page presents them as colour choices. It does not document different load capacities, heating systems or fitment ranges by colour.
