Advertisement / commercial content.
Decision Maker 4X4 sells the products discussed here. This guide compares our published product descriptions and supplier gallery images. We have not independently tested handle strength, accessory loads or compatibility with your vehicle's safety systems.
For a TANK 300 A pillar kit, start with the accessories actually listed in the package. RAWME names handles, a phone holder, a sports camera mount and parking number plates. MTF names a phone rack, cup holders and ball heads. A shared location in the cabin does not make these the same kit or establish interchangeable hardware.
Source verification date: 2026-10-30. We checked the RAWME A Pillar Handle Kit and MTF A Column Multifunction Handlebar Platform descriptions and their current colour selections. These dated catalogue details are the basis of the comparison below.
In this guide:
- What is listed in each kit
- Choosing by mounting task
- Colour and gallery checks
- Cabin and installation checks
- What to confirm before ordering
- Common questions
What does each written packing description list?
The RAWME page lists 1 mobile phone holder, 1 sports camera mount, 2 parking number plates and 2 A pillar handles. The MTF page lists 1 mobile phone rack, 2 water cup holders and 4 one inch ball heads. These quantities come from the linked descriptions checked above; they are not counts inferred from the gallery.
| Package detail | RAWME description | MTF description |
|---|---|---|
| Phone mounting item | 1 phone holder | 1 phone rack |
| Sports camera mount | 1 listed | Not named in its component list |
| Parking number plates | 2 listed | Not named in its component list |
| Cup holders | Not named in its component list | 2 listed |
| Handle quantity | 2 explicitly listed | Ask for the complete current packing list |
| Ball heads | No separate count established here | 4 one inch ball heads listed |
Not named means the reviewed description does not establish inclusion. It does not certify that a particular component is absent from every current package. Ask for the written contents of the exact order if a camera fitting, handle pair, adapter or fastener matters to your setup.
Which mounting task should guide the choice?
If a sports camera mounting item and a pair of handles are central to your plan, RAWME provides explicit entries for them. If cup mounting is the priority, MTF explicitly names cup holders. Use those differences to decide what to investigate first, rather than assuming every object in a styled cabin photo is supplied.
A phone holder, phone rack and ball head are component descriptions, not a complete device compatibility chart. Confirm the size and arrangement needed for your phone, case, camera or other accessory. Neither reviewed description establishes every supported device dimension or a numerical accessory load limit.
The useful question is whether the complete assembly can serve your intended task in the actual cabin. That includes the accessory position, the connecting parts and access to existing controls. More mounting points do not by themselves establish a better driving arrangement.
Are the colour choices and photographs enough to order?
Both current product selectors offer Black and Silver. The supplier images show examples of those finishes, but lighting and screen appearance are not a precise colour reference. Check the named selection on the order and request clarification if matching an existing cabin finish matters.
The RAWME black and silver layouts and the MTF silver and black product scenes used here are catalogue examples. They are not a measured fitment comparison, a complete installation sequence or evidence of strength. Accessories arranged beside a platform also do not prove that the assembly has been tested with a particular device attached.
What must be checked inside the vehicle?
Both listings cover compatible TANK 300 petrol and hybrid interiors while leaving exact model years for confirmation. RAWME also notes that trim, A pillar design and accessory placement can affect fitment. A model badge alone is therefore not the final compatibility decision.
RAWME recommends professional installation around A pillar trim and safety systems. Its description asks buyers to check that installation does not interfere with airbags, driver visibility, cameras, screens or controls. MTF asks for a test fit and checks around airbags, sightline, mirror view, instruments, vents, window controls and door movement.
Treat those as checks to complete with a qualified installer on the actual vehicle. This guide does not define an airbag deployment zone or approve a mounting location. Obtain the current instructions and exact hardware details before dismantling trim or adapting an existing mount.
The descriptions also call for securing accessories and rechecking fasteners after rough road use. They do not provide a complete torque schedule or independent strength test. Do not turn the word handle into a certified body weight capacity or assume a ball head can carry any item that attaches to it.
What should you send before buying?
Send the product link, selected colour, exact year, powertrain and trim. Add clear photographs of the intended cabin area and identify any existing mounts. Describe the device or cup you want to carry and ask for the required fittings, complete packing list and installation instructions in writing.
Keep nearby accessory decisions separate. Our RAWME cockpit bracket guide covers a different mounting category, and the RAWME vent cup holder guide covers another location. Neither is proof that its hardware or clearance applies to these A pillar kits.
Send Decision Maker 4X4 your exact vehicle and accessory details. Choose the documented package that fits the task, then confirm the cabin arrangement before ordering.
Common questions
Does RAWME list a pair of handles?
Yes. The reviewed description explicitly lists two A pillar handles. Confirm the current order contents and any necessary installation fittings.
Does MTF list a sports camera mount?
Its named component list covers a phone rack, cup holders and ball heads. Request confirmation of any camera fitting required rather than assuming it is included.
Can these listings confirm every TANK 300 year or accessory load?
They do not provide a complete model year chart or numerical load certification. Confirm the exact vehicle, fitting and intended use before installation.
